General Spectrometer Accessories
Glass Expansion Conikal DC Nebulizer 2mL/min, Includes NFT-16-75 UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 piece) and 70-803-0969 Gas Fitting with Ratchet Nebulizer connector
Conikal DC Nebulizer 2.0mL/min, includes UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 11 with ratchet connector (1 pc). Compatible with Vista/700-ES Series ICP-OES, 4100/4200 MP-AES.Optimum nebulizer gas flow rate is 0.7L/min and sample flow rate is 2.0mL/min. Recommended not to exceed optimum 2.0mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40 psi at 0.7L/min gas flow rate. The Conikal nebulizer is a high-performance, general use glass nebulizer, that tolerates up to 5% TDS and 75um particulates.Replacement parts include P/Ns NFT-16-75 and 502703076.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Conikal DC Nebulizer 2mL/min, Includes NFT-16-75 UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 piece) and 70-803-1105 Type 13 DC Fitting with Ratchet Nebulizer connector
Conikal DC Nebulizer 2.0mL/min, includes UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 13 with ratchet connector (1 pc). Compatible with Agilent 5100/5110/5800/5900 and Analytik Jena ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min and sample flow rate is 2.0mL/min. Recommended not to exceed optimum 2.0mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40 psi at 0.7L/min gas flow rate. The Conikal nebulizer is a high-performance, general use glass nebulizer, that tolerates up to 5% TDS and 75um particulates.Replacement parts include P/Ns NFT-16-75 and 501907289.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Solva Flex Pump Tube 3 tag , 82mm spacing, 1.14mm ID, Red/Red (PKT 12)
Solva Flex Pump Tube 3tag, 82mm spacing, 1.14mm ID Red/Red (PKT 12).Tag Colors: Red/RedID mm: 1.14Wall Thickness mm: 0.86OD mm: 2.86Overall Length: 430mm (82mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion OpalMist DC Nebulizer 1mL/min with 1,500mm tubing, Includes 70-803-1096 Nebulizer Connector (1 piece), and 70-803-1311 Gas Fitting with Ratchet Nebulizer connector
OpalMist DC Nebulizer 1.0mL/min, includes UniFit Connector with 0.75mm ID x 1.3mm OD x 1500mm long tubing (1 pc) & DC Gas Fitting Type 41 with ratchet connector (1 pc). Compatible with Shimadzu 9000/9800 ICP-OES.Optimum nebulizer gas flow rate is 1.0L/min & sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. OpalMist is made from high purity PFA resulting in the lowest background & exceptional resistance to HF. Tolerates up to 15% TDS & 75um particulates.Replacement parts include P/Ns NFTS-075 & 501907301.Recommended nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Cole-Parmer Jenway 630-204 Cuvette Holder, 10 x 10 mm Square
These parts and accessories to expand analysis capabilities or make testing easier.
Perkin Elmer US LLC Spacers for Semi-Demountable Cells - PTFE, 0.05 mm, Qty. 6
PerkinElmer supplies rectangular spacers made of either lead or teflon. These spacers come in a variety of thicknesseses, allowing you to customize the Universal Demountable Cell's path length to the experiment's requirements. Also available is a packet of Assorted Rectangular Spacers (L1270421) which includes two of each type of spacer. Please note: When rectangular windows and spacers are used, the Universal Demountable Cell becomes a Semi-Demountable Cell.
Glass Expansion RF Coil Silver for 700-ES Series Radial
RF Coil Silver for Agilent (Varian) 700-ES Series Radial ICP-OES. Compatible with Agilent (Varian) 700-ES Series Radial ICP-OES. The RF coil is susceptible to corrosion in the torch box, which eventually lowers the conductivity of the coil. The greater the corrosion, the larger amount of energy is needed to produce a plasma of the same power. Coils in a corroded condition, increases the stress applied to other components in the RF generating system, and can shorten the lifetime of your torch. Copper is used as the base material of most commercially available coils but different plating materials are available. Silver has the best conductance & gold the best corrosion resistance. For Gold 501907323, PTFE Coated Silver 501907325.To install your coil and ensure proper alignment, we highly recommend our re-useable RF Coil Installation Tool Kit (501907326).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch with 1.0mm Injector for Agilent 7700/7800/7900/8800/8900
Quartz Torch, single-piece, 1.0 mm id tapered injector (G3280-80081), for volatile organic solvent analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS. Suitable for organic applications with volatile solvents but not inert to samples containing hydrofluoric acid (HF).For volatile organic solvents, also see catalog number 50-190-6994.For samples containing HF see catalog number 30-808-4185.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch with 3 slots for Optima 2000/4000/5000/7000 DV
Quartz Torch, 3-Slot demountable quartz torch standard for PerkinElmer Optima 2000/4000/5000/7000 DV Series ICP-OES (N0772005).Recommended for organic solvent applications, but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Sapphire Injector 2.4mm for D-Torch
Sapphire Injector with 2.4mm ID.2.4mm ID sapphire injector (50-190-7222, 31-808-3414). This sapphire injector, with 2.4 mm I.D., is for use with Spectro EOP/SOP, Axial/Radial (Modula, CIROS, Genesis, ARCOS) ICP-OES, not for ARCOS II. Sapphire injectors are ideal for silicon and HF applications.Spectro EOP/SOP, Axial/Radial (Modula, CIROS, Genesis, ARCOS) ICP-OES Injectors - Compatible with Glass Expansion Axial D-Torch 50-190-7029 (30-808-3496) and Radial D-Torch 50-190-7023 (30-808-2928). Optional Tapered Quartz Injectors are 1.8 mm 50-190-7168 (31-808-2974), 2.5 mm 50-190-7252 (31-808-3723) and 3.0mm 31-808-3724, Tapered Alumina Injectors are 1.2mm 50-190-7191 (31-808-3238), 1.8mm 50-190-7166 (31-808-2963) and 2.4mm 50-190-7214 (31-808-3388). Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Nickel Sampler Cone for Thermo Scientific Element 1/Element 2/Neptune ICP-MS
100% Nickel Sampler Cone ¿ For Thermo/Finnigan Element 1, 2 & Neptune ICP-MS. Use for lowest Cu background, and suitable for most common applications (e.g., routine aqueous samples, <5% acid matrix, non-HF, non-organic). Not recommended for samples containing hydrofluoric acid (HF). Use a new Graphite Sampler Cone Gasket (501907717) each time the cone is re-installed, even if it¿s the same cone. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.For lowest boron background and semiconductor applications, we recommend a platinum cone, see catalog number 501907711.For high sensitivity applications and low matrix containing samples, we recommend Nickel Jet Sampler, see catalog number 501907709.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC SeaSpray Glass Nebulizer, 2.0 mL/min, for ELAN/NexION 300/350
The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization effciency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts, and conferring signifcant sensitivity gains. All SeaSpray Nebulizers are supplied with the EzyLok argon connector.
Perkin Elmer US LLC Alumina Injector, 1.2 mm I.D. for Optima 2/4/5/7x00 DV
This Alumina Injector is for use with Optima 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
Thermo Scientific MIRA MIST NEBULIZER
Mira Mist Nebuliser; HF resistant, parallel path nebulizer intended for the analysis of; samples containing HF acid and/or samples containing high levels of; dissolved solids.; The unique parallel path design provides enhanced resistance to; blockages when running samples containing; fine particulates and dissolved solids.; The nebulizer design enables liquid aspiration over a variable flow; rate of 0.2-2.5 ml/min and is compatible with all iCAP 6000 Series; Spectrometers
